First of all, it is necessary to confirm whether the metal chair has been treated with anti-corrosion treatment. Due to the limited performance of the metal itself, the metal part of the chair which is not treated with anti-corrosion treatment or improperly handled can easily rust in a humid environment.
Secondly, the metal parts of the wrought iron chair are welded. Therefore, it is necessary to carefully observe whether the welded parts and the respective metal bends are firm, smooth, and have no obvious protruding pleats.
Third, observe whether the riveting of the metal parts and the steel pipe is firm, and whether the rivet cap is smooth and flat without burrs. **, also check the whole body with your hand to see if the surface of the chair is smooth and there are no bumps, bumps or bumps.
Solid wood chair: You can wipe it directly with a dry cloth, then apply some cleaning agent, do not use a cloth that is too moist, and then dry it, which will make the internal decay of the solid wood speed up. But don't expose to the sun, it will make the internal decay of the solid wood faster, affecting its service life.
Fabric chair: When cleaning the fabric chair, the key part is the finish, because it is made of cloth. To ensure that the fabric is not damaged, it can not be brushed. It can only be wiped with a wet towel. If it is dirty, it can be diluted. The cleaning agent is cleaned, and the concentration should not be too high to avoid discoloration.
Wrought iron chair: We all know that wrought iron furniture is easy to embroider, so when it is used normally, try to contact the water as little as possible. When cleaning, use special detergent, spray it, and scrub with a rag. Then dry randomly. That's it.
Leather art chair: The method of cleaning the leather art chair is very simple compared to the fabric chair. We only need to wipe it gently with a wet towel. Because it is leather, it is better to clean. However, this type of chair can not be exposed after cleaning. In order to avoid serious damage to the cortex, and try to brush the oil once it is dry.